Ashkar Group Of Companies

CAST IRON GATE VALVES

CAST IRON GATE VALVE NON RISING STEM

Product Features:

1. The structure is tight and the design is reasonable. The valve has good rigidity, the channel DU is smooth and the flow resistance coefficient is small.

2. Stainless steel and hard alloy are used for the sealing surface, and dao has long service life.

3. Flexible graphite packing, reliable sealing, light and flexible operation.

4. Driving mode:  split, electric, pneumatic and gear transmission, structure: elastic wedge type single gate, rigid wedge type single gate and double gate models

 

CAST IRON SWING TYPE CHECK VALVES

Product Features:

1. The structure is tight and the design is reasonable. The valve has good rigidity, the channel DU is smooth and the flow resistance coefficient is small.

2. Stainless steel and hard alloy are used for the sealing surface, and dao has long service life.

3. Flexible graphite packing, reliable sealing, light and flexible operation.

4. Driving mode:  split, electric, pneumatic and gear transmission, structure: elastic wedge type single gate, rigid wedge type single gate and double gate models.

 

CAST IRON Y STRAINER

Y-Strainer is a very cost-effective filtration solution in many applications. In the case where the amount of material to be removed from the stream is relatively small, resulting in long intervals between screen cleaning, the filter can be manually cleaned by closing the production line and removing the filter cover.

 

For applications with heavier dirt loads, Cast Iron Y-Strainer can be equipped with a "blowing" connection, allowing the filter to be cleaned without removing it from the filter body.